Jeff,
You have AGI.
Go to website
www.esab.com
and send the enquiy and you will get response.
Cheers
From: Jeff Lim <jeff.lim@fasweld-asia.com>
To: materials-welding@googlegroups.com
Sent: Fri, 20 November, 2009 1:14:16
Subject: [MW:3690] Laser wire
Hi Good afternoon all.
I am a new member.
I need a favor from your. Can you check out for me in USA which company
manufacture & supply welding wire?
I want to purchase for my welding job.
This welding wire is a Filler material.
I like to purchase Straightened rods, depending to material, between
0,15 mm and max. 0,50 mm diameter.
The meter rods pack in PET-tubes of 7~10 mm diameter, with caps on
each end. This tube is very useful for stock.
Best regards,
Jeff.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
You have AGI.
Go to website
www.esab.com
and send the enquiy and you will get response.
Cheers
Veraf Khambatta
Mobile- +44 7917 479 321
Mobile- +44 7917 479 321
From: Jeff Lim <jeff.lim@fasweld-asia.com>
To: materials-welding@googlegroups.com
Sent: Fri, 20 November, 2009 1:14:16
Subject: [MW:3690] Laser wire
Hi Good afternoon all.
I am a new member.
I need a favor from your. Can you check out for me in USA which company
manufacture & supply welding wire?
I want to purchase for my welding job.
This welding wire is a Filler material.
I like to purchase Straightened rods, depending to material, between
0,15 mm and max. 0,50 mm diameter.
The meter rods pack in PET-tubes of 7~10 mm diameter, with caps on
each end. This tube is very useful for stock.
Best regards,
Jeff.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment