Re: [MW:32148] interruption limitations to stop welding

according to you its good engineering practice?, all problem finding will give good result , all code book they finding problem and solve result at next edition  

On Friday, April 2, 2021 at 7:14:14 AM UTC+4 dili...@gmail.com wrote:

Why you are trying to find problems when there is not

Στις Πέμ, 1 Απρ 2021, 09:51 ο χρήστης sankar krishnan <sankar...@gmail.com> έγραψε:

Dear All ,

  In our Pressure vessel project 10mm thickness plate they using (GTAW+SAW) process , They have welded GTAW with 4 mm of 10mm thickness and leave open for 1 days .. I like to Know what is the interruption limitations to stop welding Limits for <19mm thickness 

Please send me code documents 

--

https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0ca6ac61-bff9-444e-bc40-80249c545c8dn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/fdf5dfc7-8952-489a-82ab-344a3b0b9571n%40googlegroups.com.