Re: [MW:28222] Throat Thickness in welding between DIN-18800 part 1 & EN1993 part 1

Check asme B 31.3 or 31.1 are incorporating with your requirements, if not there will be client specifications where his requirements ensured with the reference to international codes.

Regards 

Muneeb. 

On Sat, Aug 25, 2018, 1:04 PM 'Bijay' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear Experts

In one of my project I have facing problems in throat thickness of welding.

Our governing code for welding is DIN - 18800 part 1, but as per clients instruction we have to follow the EN 1993 part 1 for throat thickness.

I can't find anything regarding throat thickness. Please guide what to do ?

Thank you in advance.

 

With Regards

Bijay Kumar Choudhury

Mob +91 8980630973

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.