Re: [MW:28201] PQR was carried out with I-beam S355 ML materials. Shall I proceed A-36 materials for WQT…. Is this materials same equivalent material P no’s & G-no’s

Not equivalent

On Wed, 15 Aug 2018 3:46 pm 'Raja kumarasamy' via Materials & Welding, <materials-welding@googlegroups.com> wrote:

Dear sirs,

 

Kindly please advice PQR was carried out with I-beam S355 ML materials. Shall I proceed A-36 materials for WQT…. Is this materials same   equivalent material P no's & G-no's

 

Regards 

 

Raja kumarasamy

Welding & Piping inspector

Salalah LPG Project

Oman Gas Company (OGC)

Oman Mobile:  +968-91983421

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.