ok if cracks porosity dimension spatter etc occur it is not acceptable u didnt observe one word in qw194 - performane ie for welder . weld should be free of surface defects which are not force to use magnify glass. performance nd procedure should be free of surface defect incomplete fusion penetration
Sourav Bohray
Quality Engineer (QA / QC ) and Welding Engineer - Pressure Vessel and Heat Exchanger
Contact- ermechsouravbohray@gmail.com
Quality Engineer (QA / QC ) and Welding Engineer - Pressure Vessel and Heat Exchanger
Contact- ermechsouravbohray@gmail.com
On 4 Aug 2018 1:52 p.m., "sathishkumar" <sathishbemech@gmail.com> wrote:
Hi, Please refer QW-194 of section 9 and also owner/client can decide as well.
Regards
Sathish
Sent from my iPhone> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> On Aug 4, 2018, at 12:03 PM, Souravbohray <ermechsouravbohray@gmail.com> wrote:
>
> sorry i think there is no acceptance criteria given for visual inspection. but during visual inspection dimensional and surface should be free of porosity . crack . undercut .incomplete penetration n fusion. than for consider its relevant or non relevant u have to do lpt.
>
> --
> https://materials-welding.blogspot.com/
> https://www.linkedin.com/groups/122787
> ---
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> Visit this group at https://groups.google.com/group/materials-welding.
> For more options, visit https://groups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/3zuayXJ0WvM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment