Re: [MW:28213] Can I use P NO-1, G NO-1 (PLATE) TO P NO-1, G NO-2 (PLATE) P.Q.R. for welding of ASTM A333 Gr.6 (P No: 1, Group No: 1) to ASTM A350 Gr.LF2 CL.1 (P No: 1, Group No: 2).

If impact not applicable then Group is non essential variable.

Thanking You,

With Regards..
Dinesh V Somwanshi
Api 570, Cswip 3.1,Bgas 2
Authorised Certified Piping, Welding, Painting Inspector.
00919881344135

On 24 Aug 2018 18:47, "chiranjeevulu temburu" <chiranjeevi1214@gmail.com> wrote:

Dear All,

Can I use P NO-1, G NO-1 (PLATE) TO P NO-1, G NO-2 (PLATE)  P.Q.R.  for welding of  ASTM A333 Gr.6 (P No: 1, Group No: 1) to ASTM A350 Gr.LF2 CL.1 (P No: 1, Group No: 2).

Please give suggestions in accordance with ASME Section-IX 

Thanks and Best Regards,

CHIRANJEEVULU TEMBURU l +918790956353.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.