Thursday, August 23, 2018

[MW:28207] Minimize concavity of fillet weld in saw welding.

Dear All,

We are doing fillet welding of 10 mm leg length, so throat should be around 7 mm.
But due to concave weld profile we are getting 4 mm  to 6 mm throat.

What are the possible remedies to rectify this.


Regards

Neem Lal
Welding Engineer
HMM INFRA LTD.
AMBALA (HR) 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35748] Re: PQR- Chemical testing requirements

As answered by everyone, chemical is not required. Notwithstanding, please note that A-No. which denotes weld metal chemical composition is ...