Dear Kareem
For UT it has mentioned in API 650 Clause 8.3.2.5 & for DPE Clause 8.4.4
8.3.2.5 says acceptance standard shall be agreed upon by the Purchaser and the Manufacturer
8.4.4 says acceptance standard and removal and repair of defect shall be in accordance with Section VIII,Annex 8,Para 8-3,8-4 and 8-5 of ASME Code.
With Regards
Hasin Shaikh
On Tue, Aug 7, 2018 at 3:59 PM, 'Kareem Sheikh' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Good day,Please share acceptance criteria of UT & DPE for storage tanks.Your prompt response in this regards will be highly appreciated.--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment