Re: [MW:26112] About GMAW , metal transfer technique recognition

Arc Voltage less than 21v  is a short circuit/Dip transfer mode

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Sun, Feb 19, 2017 at 10:16 PM, Prasad Rode <purode333@gmail.com> wrote:

This message is eligible for Automatic Cleanup! (purode333@gmail.com) Add cleanup rule | More info

Dear sir,

All of we know that in GMAW process, there are three metal transfer techniques.
1) spray transfer.
2) globular transfer
3) short circuiting.

We know that, as per different temperature, voltage and with different shielding gases also, different technique generated.
But, on site and in practicality, how we come to know that welder is using which type of technique.

Regards
Prasad

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f7b0c462-cc40-4a09-8855-5423174662d2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eONvXwdOMEo3kPriE0x_07wRM%3Dj312n8rLYUSdDt%2BCDEw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.