Re: [MW:26016] Regarding 2% sensitivity in radiography film.

Thank to Mr. George sir, for providing the section se- 1025.

After refer the section, I want to only conclude that, sensitivity percentage is related to " Image quality level" as mentioned in sub section part 6.1

And 6.3 also clearly mention that that image quality level should be mention in contract or related document, spec etc or inplace of that minimum IQI and hole size should be specified, which normally we get from artcle 2.

Sorry for such a late reply, after study or refer only I replying.

Sir, is I concluded correct?

Regards
Prasad

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/7517ea2b-3263-43c4-ad62-ed790318373b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.