[MW:26020] Regarding the welding consumable for the joint on Saddle(or Support lug) to Reinforced pad

Dear Experts,

I would like to ask you the choice of the welding consumable for

- Joint on Saddle to Reinforced pad

- Material :

1. Saddle - CS(SA283-C) : P-1

2. Reinforced pad - Low alloy(SA387-5) : P-5B 

In that case, which P No welding consumable is applied for that joint. 

P-5B or P-1.

If there are any requirement for this issue in the ASME code, please advise me.

Best regards,

Kim, Junghwan as Project Manager in DKME

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b01bb0fa-e5f0-411d-9db6-a0f519458e0a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.