[MW:26064] Fwd: Welding position

Dear all

My Query is mentioned in below mail,

I have to weld, details as under,

I rolled plate, on top of this shell one ring to be welded, which is Fabricated from plate, 

What type welding position test is required for this fillet joint, as per ASME IX,

Either it is 4G, or 4 F or 3F, 

This joint is not Over Head joint, Electrod will be used at 45 degree, like the welding as horizontal joint, 

Please provide information as code reference,. 

Thanks

Umar Daraz Khan

Incharge Fabrication 

---------- Forwarded message ----------
From: "Umar Daraz Khan" <udkhan@gmail.com>
Date: Feb 13, 2017 2:53 PM
Subject: Welding position
To: <materials-welding@gogglegroup.com>
Cc:

Dear all

I wants to weld plate Ring on top of rolled shell plate, 

What welding position I have to apply in the light of ASME IX

Either 3F, 4F or 4 G, 

It is not 100 percent 4F not 3F, 

I think it is not 4 G

Please advise

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJScQE6vymqJWfpaC%3DgcYK50qe0ZsSdNqUPcq39D%3D7gZxQGY3A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.