Re: [MW:25150] PWHT

This information is gold, few people know.

Regards!.

2016-07-27 1:49 GMT-05:00 Krisanu Bhunia <krisanu.bunty@gmail.com>:

thank you, A537 CL1 is P1 marital but which thickness can do welding and which clause it is mention     

On Tue, Jul 26, 2016 at 8:45 PM, José Juan Jiménez Alejandro <jjjimeneza@gmail.com> wrote:

BPVC ASME Section VIII Div 1, allows welding after the PWHT, but only for materials P1 and P3 and only certain thickness, but remember that this code is only for new equipment, not for equipment being repaired, if this is your building code ahead !.

2016-07-25 3:41 GMT-05:00 ishwar kumar <ish8623@gmail.com>:

Sent from my iPhone

On 15-Jul-2016, at 3:11 AM, Krisanu Bhunia <krisanu.bunty@gmail.com> wrote:

Dear sir,

In clean out door in tank we found welding not sufficient after PWHT.(A 537 CL1)

SO, now need to welding again . PWHT again doing or can avoid it by which code ?

Regards

krisanu bhunia

 

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMZth3qmH8a3w0Efd96-M12HsymvR61YRPz18j1nOFpdZME9PQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/4797E08A-DC0C-48F2-924D-5F0F5CA2C326%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Ing. Jose Juan Jimenez Alejandro

Cel. 8116171750

Skype: jjjimeneza

--

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---

You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/uHRzkNOaGNw/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurK%3DsL48-4rGdYMqNxnQNa7ZKXYkqoiE7rMePC7mpAu48w%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMZth3r9R93LbPOOBr%2B1cQVttdywdCK36QHp3Upjh%2B2SRrt4yQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--

Ing. Jose Juan Jimenez Alejandro

Cel. 8116171750

Skype: jjjimeneza

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5Zur%2BjbHf849DKFr%2BA_H6Ye2BsercDSdxh3H0w4id8C35xMA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.