Re: [MW:25132] PWHT

u should have simulated before taking up job. It is normally done by expecting  weld repairs after SR

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Thu, Jul 21, 2016 at 9:59 AM, 'Prakash Hegde' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hi!

Selecting the Time and temp for PWHT is important  as it affetcts the mechanical properties

For which LM (Larsen Miller parameters ) helps

Increase in soaking time beyond certain limit deteriorates the mechanical properties

e.g. As per LM parameters  PWHt soaking temp of 650C with  2hrs soaking time is equivalent of 9hrs soaking time at 620C (even though code says for P1 soaking temp min 593c to below AC 1 )

Therefore you can imagine the importance of PWHT temp and time

Regards

Hegde

On Wednesday, 20 July 2016 9:28 PM, ishwar kumar <ish8623@gmail.com> wrote:

Dear experts

My query is what happens if the soaking time during PWHT is increased beyond the specified minimum time. I know section 8 days minimum soaking time only.

Suppose if required soaking time is 2.5 hours and actual soaking time is 5 hours

Regards
Ishwar Dhiman
Cswip 3.1,ASNT NDT Level-II

Sent from my iPhone

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/2888C0BE-2391-482F-95BA-0A98DEA102FE%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/447015553.2184132.1469075397667.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNNP2%2By-BK%2BEyfOimtv%3DAQ%3DjaLOsGjR%3Dw8FxtU2odmy-g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.