Hello Ankit,
Seamless tubes would always be a better choice for any corrosive and demanding applications. This document provides general guidelines on the various differences between two types of tubes.
Thanks.
Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist ,
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ankit Gandhi
Sent: Sunday, July 03, 2016 11:21 AM
To: Materials & Welding
Subject: [MW:25061] TUBE SELECTION IN HEAT EXCHANGER
Dear sir,
I would like to know that what is criteria to select Tubes [Seamless or Welded] in heat exchanger ?
Which one is better as per strength?
Regards,
Ankit Gandhi
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ca0eed35-9269-459f-bbe7-7c1e4b9af2eb%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment