Re: [MW:24867] E6013 not Applicable for High Thickness material

I would never recommend E6013 for main load bearing members welding unless the designer has considered very high safety structures. For steel structures under EuroCode 3 almost nobody is using E6013. E7018 or FCAW with E71T-1 for example. Some specs do not allow at all GMAW for critical structures 

2016-05-25 11:28 GMT+03:00 JIJILAL K M <jijilalkm2@gmail.com>:

Dear KG P,

E-6013 is generally recommended for general purpose welding as far as overall quality is concerned  .that doesn't means E-6013 not suitable for high quality welding.

JIJILAL K.M. 

QA/QC Manager,

Thai Jurong Engineering Ltd,

KCE SPP Project,Thailand

#096 786 0129

On 25 May 2016 at 11:38, Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:

do u mean that u can not get RT quality in 6013? for lesser thick also

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Wed, May 25, 2016 at 10:06 AM, Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:

why u are not using 6010 for entire thickness or why  are not using 7010,

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Wed, May 25, 2016 at 9:06 AM, JIJILAL K M <jijilalkm2@gmail.com> wrote:

Dear Amit,

E- 6010 - Cellulose flux having deep penetration property , recommended for root pass welding of cross country pipe lines.

E-7018  - Basic Coated , Low hydrogen ,iron powder type electrodes having more tensile strength recommended for  filler                     and cover pass welding (after root and hot pass by GTAW)  piping fabrication.

E-6013 -  Rutile (titania)  flux is recommended for general purpose welding (say Gate /grill fabrication).

first two is considered where radiographic quality weld is required.

JIJILAL K.M. 

QA/QC Manager,

Thai Jurong Engineering Ltd,

KCE SPP Project,Thailand

#096 786 0129

On 25 May 2016 at 10:12, Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:

Siraj

       What is the reason ?

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Tue, May 24, 2016 at 9:45 PM, Mohd Siraj <mohd52100@gmail.com> wrote:

E6010 NOT E6013 USED FOR PIPELINE ROOT.

6013 IS STRUCTURE GENERAL PURPOAE ELECTRODE.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c7954c58-48ae-4a65-b826-bac6e211ee15%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOhvYw0DV0HZExNQFL0omhrQBwoaQc24Oa1wv62Cp1owA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHmEnHgnCj45%2BEWtrwt--roAKrNjvzeWj3%2BytvJcbVyJQ6KRQQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOfkS%3D%3DuHntfzSzUbdBV%2BQ1Uiobp9dTqJqVsx_zZfWmbg%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHmEnHi9WeQ-OzTc8s1Kx_wC_G0fdVkjh7jXj4r%2BFi_cBu%3DPGA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AGncq%3DuJMMmO9qe4y83zhVA_VJOoLPCe-pc4K7HZyiJw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.