Again, incorrect information.
Section VIII, UCS-56.f.4(-a) applies only to repairs avoiding PWHT by use of temper bead or half bead technique. See UCS-56.f.4(-c).
There is no weave width restriction for general welding in either Section VIII, Div. 1, or Section I.
Do not apply special case requirements to general welding. A recurring mistake made by many.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Chandra
Sent: Sunday, May 22, 2016 8:47 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:24828] Weare or string
As per ASME Section VIII Div1,
Please refer to the para UCS-56 (Requirements for Postweld Heat Treatment) para f(4)-a
Mentioned as maximum bead width shall be four times the electrode core diamter.
Best Regards,
Chandra
On 21-May-2016, at 2:28 PM, haundpvcms2016@gmail.com wrote:
I am wondering if anyone knows what the maximum weave is for SMAW (specifically ASME Section VIII Div 1). For some reason 3x is sticking in my brain, but I would like to know where to find it in the ASME Codes.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/24ee9b7d-4956-4f4d-8a40-86b41259ea8f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/32C2F815-0F38-4873-A911-0E5C70994009%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment