Re: [MW:24849] AWS D 1.2 - WPS/PQR for Aluminum AA5052-H34

Not possible. You have to use an intermediate component manufactured with explosion bonding 

2016-05-24 8:32 GMT+03:00 Dinesh Patil <dinn.patil@gmail.com>:

Dear All,

Carbon steel(SA516-70) to Aluminum welding is possible to weld together. If possible then which filler used for GTAW process.

Dinesh Patil

din.patil@gmail.com

On Fri, Aug 8, 2014 at 9:01 AM, 'Karthik' via Materials & Welding <materials-welding@googlegroups.com> wrote:

 Hi,

The attached file might be useful to you.

Thanks & Regards,

(Karthik)

Karthikeyan.S

QA/QC Manager

German-Thai Boiler Engineering Cooperation Limited.

Rayong Factory ;

379 Moo.6 Soi 8, Tambol Pananikom,

Nikompattana, Rayong 21180 THAILAND

Tel : +66 38 897 035-9 Ext. 137

Fax : +66 38 897 034

Hand Phone: 0066 892512282

On Thursday, August 7, 2014 10:23 PM, "amitrunsworld@gmail.com" <amitrunsworld@gmail.com> wrote:

Dear Expert

 We are facing crack problem in HAZ during GTAW welding of

Aluminium AA5052 vs. AA 5052, Temper –H34

Shielding gas- Argon

10mm thickness plate,

Single V butt joint

Filler Material AA4043-H18.

Edge Preparation: Included Angle 70 degree, root gap. 1.2 mm.

 We are making WPS/PQR as per the AWS D1.2. Please advice welding parameter need to be change to get Bend and tensile result as per requirement for procedure Qualification.

 

Thanks

Amit Patel

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPaX8ZJ2Qd7CpPQwy8G6GKqhJy0n_pXN4KmmtRMMBFCe7P-00Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40B9PERHab3M113zH6vVcT1b1dp_XsTEB2nR%2B1ygvFrWSw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.