Re: [MW:24896] Re: ASME SEC IX...PWHT?

Yes subject to the conditions stated on 331.1.3.

My personal advise: follow the requirements of 31.1 (power piping) on this matter

2016-05-27 9:44 GMT+03:00 mohammed faisal ahmed shareef <faisalmech330@gmail.com>:

Hi All ;

As per the latest Edition of ASME B31.3 2014 all materials for PNo 1 are exempt from PWHT .I don't have a current copy but this is the link

http://www.eng-tips.com/viewthread.cfm?qid=381691

On Tuesday, 26 January 2010 17:33:23 UTC+8, Nandesh Kumar wrote:

Dear All,   For our LNG piping project, as per ASME SEC IX for a pipe 16 inch OD and Thk 21.44 mm PWHT is manadtory? We are welding root and hot pass TIG and others SMAW. Material is ASTM A333 .   Thaks in advance Nandesh Kumar A

---

Your Mail works best with the New Yahoo Optimized IE8. Get it NOW!.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/7c53cbab-7caf-4c08-a2cc-2ddccafecc6a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40A0Ecnj0LCRMjR6zzeSmiXmC%3DNgUNf2pSTvK452SJL%3Dmw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.