Tuesday, October 28, 2014

Re: [MW:22191] RE: 22185] material/grade of pipe for water with minor silt

Dear Laxman,

i m using.this pipe with a pump. Pressure is about 80 bar. Yes its above ground. The water has some silt content. The silt size is about 300 mesh.


On Tuesday, October 28, 2014, Lakshman <lakshmankumar4@gmail.com> wrote:
> Hi,
> Please let the issue elobarated further to anyalyse in detail like as....
> Operating Pressure,and velocities
> Under ground or above ground
> Sweet water or sea water
> Pipe joining facilitation
> Pipe Dia to check the fieasability for any coating  etc
>
> Thanks and regards,
> Lakshman Kumar.B
> 9440031459
> ________________________________
> From: Kadir godil
> Sent: ‎28-‎10-‎2014 16:44
> To: materials-welding@googlegroups.com
> Subject: [MW:22185] material/grade of pipe for water with minor silt
>
> dear experts,
> i require your help in selecting a piping grade for water containing minor silt. i am afraid of erosion inside the pipe. which grade should i select? 
> if you can mention ASTM grade it will be of great help.
> thank you.
> sincerely,
> kadir
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>  
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>  
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone