Re: [MW:22111] using pqr two different customer

The position is not affecting the wps qualification.
So you can qualify your welder using any Wps without considering the position on which the pqr specimen was prepared
Best regards
Dr Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
HBS Regional Technical Manager


----- Original Message -----
From: Narender Reddy [malgireddy.2010@gmail.com]
Sent: 10/15/2014 03:22 AM MST
To: materials-welding@googlegroups.com
Subject: [MW:22110] using pqr two different customer



Dear all

I have a problem in using pqr
Q.1). A 3g pqr can be used for qualify a 2g and 3g welder or we need seperate pqr for 2g and 3g welder qualifications.with same material specification



Q.2). A wps is showing that (position=all) that wps can be used for qualify all positions but supporting pqr qualified on 3g position shall I use that wps for qualify the 2g and 3g welder



Q.3). A pqr made by some X company .the same pqr can be used for some Y company
But those X and Y companies have mutual agreement.

Thanks

Best regards

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.