[MW:22103] Change in groove type (e.g., single-V to double-V) in AWSD1.1-10

Respected experts,

I need your help to clarify a clause in AWSD1.1-Edition 2010  

In section 4 of AWSD1.1-2010 Edition there is a clause as  "A change in groove type (e.g., single-V to double-V). Qualification of any CJP groove weld qualifies for any groove detail  complying with the requirements of 3.12 or 3.13.

That means if the PQR is with Single V  is it qualified only for single V or could we write both single V and Double V in WPS ?.

Tony

Welding Engineer

+97477990265

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.