Saturday, October 18, 2014

[MW:22143] MATERIAL CLARIFICATION

Dear All,

Was the material A36 equivalent to material S275.
Can I use the WPS for        Plate to Plate (S275JR to S275JR)    to be used to  weld    Plate to Plate(S275JR to A36).

Can we substitute S275JR with A36, was this affect the machanical strength of the composite part or will it affect the weld strength         ( soundness of weld).

 If so, Kindly suggest the differences between material A36 and S275 material regarding the above mentioned properties.


Regards,

Mahesh kumar 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone