Re: [MW:22149] IQI-1A and IQI-1B

dear all
same scene has taken place at my workshop.
Vessel's shell thickness is 5 mm.
moc ss304.
xrays are performed with 1B penitrameter.i believe it is acceptable
the inspector has insisted to re shoot with 1 A penitrameter.
please suggest / advice

amit
9833859030

On 10/19/14, Jay Poojary <jayogini@gmail.com> wrote:
> Hello Mr.Mohammad,
>
> Hope you have submitted your R.T procedure to the Inspector. If it is not
> insisted in the procedure to do so, then you can oppose his request for
> reshoot. Your selection was right.
>
>
> Jay Poojary
> QA/QC inspector
>
> *cordially,*
> *Jay Poojary*
>
> On 18 October 2014 22:09, S.Mohammed <mohd52100@gmail.com> wrote:
>
>> Dear all,
>>
>> Pipe thk :5.49mm
>> Mat :CS
>>
>> Iqi selected based on thickness+reinfor(2mm) we selected IQI 1B.but
>> client
>> insist to.use us IQI 1A and given reshoot for using IQI 1B.
>>
>> Is it correct the give reshoot?
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Materials & Welding" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to materials-welding+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>


--
Warm Regards
amit

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.