Re: [MW:13389] Regarding Deletion of welding Process.

Good day Rout..
You can read also interpretation no. IX-04-08

Question: May this PQR support a WPS for welding with only one or two
of the processes shown on the PQR?

Reply: Yes, provided the following are met:
a) The remaining essential, nonessential and supplementary essential
variables, when applicable, are applied.
b) The base metal and deposited weld metal thickness limits of
QW-451 are applied.

Rgds

2011/12/31, meemo prasad <meemoprasad@gmail.com>:
> *Please read the ASME BPVC SEC-IX , QW- 200.4 Combination of Welding
> Procedures*
>
> On Fri, Dec 30, 2011 at 11:27 PM, Madhusudan Rout <madhusudan.rout@gmail.com
>> wrote:
>
>> Dear Experts,
>>
>> I need the coorect clause fro deletion of process which
>> will be use for structural fillet wed, Is it mention on any
>> International Standard, ASME or Shell DEP,
>> here Our client disagree with this piont , if Wps with GTAW+ SMAW.
>>
>> Only SMAW can not use.
>>
>> I need some refrence form you.
>>
>> Thanks & regards
>>
>>
>> Madhusudan Rout.
>>
>>
>>
>> On 12/30/11, george.dilintas@gr.bureauveritas.com
>> <george.dilintas@gr.bureauveritas.com> wrote:
>> > Yes you do can
>> > Best regards
>> > Dr Georgios Dilintas
>> > Authorized Nuclear Inspector
>> > Authorized Inspector Supervisor
>> > HBS Regional Technical Manager
>> >
>> >
>> > ----- Original Message -----
>> > From: Madhu [madhusudan.rout@gmail.com]
>> > Sent: 29/12/2011 06:07 PST
>> > To: "Materials & Welding" <materials-welding@googlegroups.com>
>> > Subject: [MW:13363] Regarding Deletion of welding Process.
>> >
>> >
>> >
>> > Dear ALLExperts,
>> >
>> > I badly need your help for Deletion welding
>> > Process for Using fillet welding Structural.
>> >
>> > I have Qualified W.P.S (GTAW-root/hot+SMAW -fill/
>> > cap)for Piping welding as per SEC-IX
>> > & its qualified for fillet in all dia/size/
>> > thickness & diameter as per SEC-IX.
>> > Can I use only SMAW process for Fillet welding
>> > In structural or Only GTAW process can be used.
>> >
>> > Or I have to Use both GTAW+SMAW process.
>> >
>> > Kindly Enlighten me regarding this matter or any
>> > code clause I have to follow ( ASME-B31.3 & Shell DEP Standard.)
>> >
>> >
>> >
>> >
>> > Thanks & Regards
>> >
>> > Madhusudan Rout.
>> >
>> > &
>> >
>> > Wishing All of you & Your Families A Healthy & Prosperous New Year.
>> >
>> > --
>> > To post to this group, send email to materials-welding@googlegroups.com
>> > To unsubscribe from this group, send email to
>> > materials-welding+unsubscribe@googlegroups.com
>> > For more options, visit this group's bolg at
>> > http://materials-welding.blogspot.com/
>> > The views expressed/exchnaged in this group are members personel views
>> and
>> > meant for educational purposes only, Users must take their own decisions
>> > w.r.t. applicable code/standard/contract documents.
>> >
>> > --
>> > To post to this group, send email to materials-welding@googlegroups.com
>> > To unsubscribe from this group, send email to
>> > materials-welding+unsubscribe@googlegroups.com
>> > For more options, visit this group's bolg at
>> > http://materials-welding.blogspot.com/
>> > The views expressed/exchnaged in this group are members personel views
>> and
>> > meant for educational purposes only, Users must take their own decisions
>> > w.r.t. applicable code/standard/contract documents.
>> >
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.