Dear Mr.Manoj..
Reference standard in Euro norms En10164-- there you willget the total details including test specimen preparation..
Client has to specify whether they need Z15 or Z 25 or Z 40 etc..
specimens has to be prepared like tensile specimen but location is through the thickness and the same will be tested like ultimate tensile stressing but the accepance criteria is not the ultimate load.. acceptance criteria is the (original diameter -distorted diameter)/original diameter in %
br,
msms
On Wed, Mar 2, 2011 at 1:45 PM, manoj john <manojacgnr@gmail.com> wrote:
--Dear members,One of my client technical specification calls for through thickness ductile testing for plate thickness above 40 mm.Can you give information about through thickness ductile testing & why we need to carry out this testing?With kind regards.Manoj
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment