sticking to B31.3 304.5.3 is fair enough for calculation of Sp.Blind thk
Regards
Aarpee
On Mon, Jan 4, 2010 at 8:31 PM, Pisat, R. R(ahul) <Rahul.Pisat@akzonobel.com> wrote:
--Hello All,
Can anybody guide me for spacer and blank, blinds design according to EN 13480-part 3 ?
Which design clause is applicable for Spacer and blanks, blinds thickness calculation ?
The formula according to 7.2.4-4 from EN13480-3 gives very high value in comparison to ASME 31.3 clause 304.5.3.please advice me about which clause of EN shall be use for calculation of spacer and blank thickness as per EN norms.
Kind regards
Rahul Pisat
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment