[MW:2894] Re: Floating head weldment - Code requirement for NDT

On such configuration, UT Shear wave may applied, and the ASME VIII specifies the criteria for it as RT is not suitable,

 

Sharief

On Mon, Jul 13, 2009 at 5:52 AM, tong tong <tong2je@gmail.com> wrote:

Dear All

Regarding above mentioned subject, i would like to seek the best NDT method to apply on floating head weldment based on requirement of codes such as ASME VIII Div. 1 or API 660 or TEMA. Attached herewith is a sketch for the joint configuration based on ASME VIII mandatory appendix 1 fig. 1-6 (d). I really need your help and expertise. If you don't mine, could you specific which code and clauses referred..Thank you in advance..

Regards

Tong2je

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---