[MW:2890] Re: corrision allowance

Dear,

 

        What if the rubber line failure? What ever lining it is, It is required to keep the corrosion allowance in the calculated thicknesses of shell and head plates.

 

Regards,

Sharief

On Wed, Aug 5, 2009 at 12:18 PM, saqib gul <saqibgul@gmail.com> wrote:

I have to design a vessel for the storage of sulphuric acid. I just want to know that if the vessel is internally rubber lined then there is a need to keep the corrision allowance in the calculated thicknesses of shell & head plates. 

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---