[MW:2720] Re: Tank bottom

The tanks are for Diesel and Gasoline. And about 6mm, where can we find this spec? Thanks Luis --- El sáb 18-jul-09, Radhakrishnan Venkatraman <r_venkat68@hotmail.com> escribió: De:: Radhakrishnan Venkatraman <r_venkat68@hotmail.com> Asunto: [MW:2713] Re: Tank bottom A: materials-welding@googlegroups.com Fecha: sábado 18 de julio de 2009, 18:30 Maximum of 6 mm shall be allowed. If the deviation from the flatness is more means,the distortion due to welding is more. If load started coming on to the tank distortion of welding eventhough it is fillet weld (between annularplates and bottom plates,bottom plates to bottom plates may arise,which is not good. regards R.Venkataraman   > Date: Sat, 18 Jul 2009 16:53:11 +0530 > From: puneet1takiar@yahoo.com > Subject: [MW:2705] Re: Tank bottom > To: materials-welding@googlegroups.com > > > > What is to be stored in the tak. > > Regards, > Puneet > > --- On Tue, 9/6/09, cuyanausul <albanesmolina@gmail.com> wrote: > > > From: cuyanausul <albanesmolina@gmail.com> > > Subject: [MW:2375] Tank bottom > > To: "Materials & Welding" <materials-welding@googlegroups.com> > > Date: Tuesday, 9 June, 2009, 3:16 PM > > > > Hello friends > > Api 650 does not specify flatness for tanks, does any one > > know the > > tolerance for inspection and the reference? > > Thanks from a new guy > > Luis > > > > > > > > > > Yahoo! recommends that you upgrade to the new and safer Internet Explorer 8. http://downloads.yahoo.com/in/internetexplorer/ > > >

---

¡Obtén la mejor experiencia en la web!
Descarga gratis el nuevo Internet Explorer 8.br> http://downloads.yahoo.com/ieak8/?l=mx --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---