PP, PE) carbon steel tank
Regards,
Gabriel
Materials Engineering Dept
Aker Process Ltd
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of esharp
Sent: 23 June 2009 13:13
To: Materials & Welding
Subject: [MW:2513] Brine Tank Material Selection
I have an old carbon steel brine tank which is severly corroded and
needs to be replaced. The brine solution contains ~ 10% salt (NaCl) and
1% caustic (NaOH) at 110 deg F. The tank is used intermittently in a
batch process: filled for a few hours then drained and left empty for 2
days. It is open to the atmosphere.
Initialy I was considering using 316 SS, but have been reading that
pitting could be a problem with the chloride. What material should be
used in this application?
Thanks for your help.
This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this email and any attachments permanently from your system.
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment