Wednesday, June 24, 2009

[MW:2530] Re: copper



Depends on what the repairs are ... is it a structural repair or cosmetic? What material is the main structure? Is this copper sheeting, or overlay, which is thinner. We'll need more data

T.

--- On Wed, 6/24/09, monica <raphaelriccio@gmail.com> wrote:

From: monica <raphaelriccio@gmail.com>
Subject: [MW:2529] copper
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Wednesday, June 24, 2009, 10:11 AM


Hi,

I have a big copper statue (monument) that i need to repair. which is
the best welding?

thanks,
monica


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35536] RANGE ASME SEC IX

Dear All we have qualified WPS for ( ASME SEC IX) 1. BASE plate 8 mm ( 8TO 16 mm RANGE WITH IMPACT )  2 . BASE plate 25 mm ( 16TO 50mm RANGE...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...