[MW:2589] Re: welding rod selection for dissimilar materials

Dear Srinivas,

If A335 Gr.P22 require PWHT depending on the thickness or service condition, then go for a buffer layer on P22 material with E309MoL , then perform the PWHT, after PWHT do the butt joint with SS316 using E316L consumable.

 

If, P22 doesn't require any PWHT depending on the thickness or service condition, then you can weld  with SS316 using E309MoL consumable.

 

Regards,

 

On 6/29/09, Srinivas <asrinivas0304@gmail.com> wrote:

Dear all,

                  kindly let me know which welding filler wire &
welding rod can be used for A335 Gr.P 22 to S.S 316 materials

Thank you.

Srinivas

--
Sukamal Naskar
Malaysia


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---