[MW:2143] Re: SMAW consumable for the welding

Hai Sandi Kumar,

 

What is the material Spec?

Is impact is required?

Is PWHT required?

What is the Thickness?

 

Regards,

Muhammed Ibrahim

2009/5/11 sandy kumar <sandy001987@gmail.com>

Hi friends

Can anyone please tell me which SMAW consumable I can use to weld following material combination :-

 

1^st material:-

C.	Si.	Mn.	S.	P.
0.50%	0.25%	0.70%	0.05%	0.05%

2^nd material :-C=0.355,Si=0.6645,Mn=1.7084,P=.0209,S=0.0326,Cr=0.2083,Ni=0.0333, Mo=0.0314,

Cu=0.0226,Al=0.0182,Ti=0.0177,V=0.0935,Nb=0.0103

Please suggest which I can use if it is not suitable.

Best regards

Sandeep Kumar

 

--
Thanks & Regards
Muhammed Ibrahim PK

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---