[MW:2142] RE: 2140] SMAW consumable for the welding

ir is better if you could specify Mechanical properties also (UTS, YS, and CVN if required)

________________________________

From: materials-welding@googlegroups.com on behalf of sandy kumar
Sent: Mon 5/11/2009 14:34
To: materials-welding@googlegroups.com
Subject: [MW:2140] SMAW consumable for the welding

Hi friends
Can anyone please tell me which SMAW consumable I can use to weld following material combination :-

1st material:-

C.

Si.

Mn.

S.

P.

0.50%

0.25%

0.70%

0.05%

0.05%

2nd material :-C=0.355,Si=0.6645,Mn=1.7084,P=.0209,S=0.0326,Cr=0.2083,Ni=0.0333, Mo=0.0314,

Cu=0.0226,Al=0.0182,Ti=0.0177,V=0.0935,Nb=0.0103

Please suggest which I can use if it is not suitable.

Best regards

Sandeep Kumar

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---