Hi!
Welding of this type of material (Used in machine tool ) is very critical and require to be welded by Eutectic type electrode. With proper preheating and technique. (Generally it is of Ni base) . You can approach L& T eutectic or MAGNA (Austrelian Co) they have the range of electrodes or Tig wire
Regards
Hegde p.B.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sandy kumar
Sent: Monday, May 11, 2009 2:35 PM
To: materials-welding@googlegroups.com
Subject: [MW:2140] SMAW consumable for the welding
Hi friends
Can anyone please tell me which SMAW consumable I can use to weld following material combination :-
1st material:-
| C. | Si. | Mn. | S. | P. |
| 0.50% | 0.25% | 0.70% | 0.05% | 0.05% |
2nd material :-C=0.355,Si=0.6645,Mn=1.7084,P=.0209,S=0.0326,Cr=0.2083,Ni=0.0333, Mo=0.0314,
Cu=0.0226,Al=0.0182,Ti=0.0177,V=0.0935,Nb=0.0103
Please suggest which I can use if it is not suitable.
Best regards
Sandeep Kumar
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment