Thursday, August 19, 2010

[MW:6594] Surface condenser :

Dear Members,

 

I have following question : -

 

1.      Surface condenser Hydrotest is required on Cooling water side or not  as per HEI STANDARD ? Vendor wants to perform Water filling test only.

2.      If Surface condenser is required to design/Manufacture/Testing as per HEI although 1.5 (or 1.3) times design pressure shall be considered for the Hydrotest ?

 

Your help is requested.

 

With regards,

 

Nilesh.

 


By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...