Re: [MW:34210] Re: TEST REQUIRED FOR FILLER WIRE AS PER ASME SECTION II PART C

Dear 

Vishwas Keska

SFA NO-5.9

AWS NO-ER316L, ER347,ER308L,

SFA NO-5.14

AWS NO-ERNICr-3

Please find the above sfa no and aws no for your reference.please explain what test require as per asme section II part C.

Thanks & Regards

Sujit

On Wed, 17 May 2023 at 13:04, Vishwas Keskar Welding Manager WELDING <vvkeskar123@gmail.com> wrote:

Which specification and AWS  wire ?

Pl refer respective specification/AWS name for required tests  in ASME SEC II C 

The consumable mfg er  will issue certificate as per that specification .

If you need particular batch to be tested  and need results which was shipped to you , this requirement  shall be addressed in Consumable PO thr TDC

Thanks

Vishwas -IWE 

On Wednesday, May 17, 2023 at 11:55:00 AM UTC+5:30 sujit kumar wrote:

Dear all,

What Test is required for filler wire as per ASME section II part C and what dimensions we have use for testing plate for filler.

Best regards.

SUJIT

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b1d21064-2722-4a64-a3c9-9793bbcfa3b7n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFonYWPbs91njze9QRF0R2S7ewyRdmUCZFd2iqmTU3MiKDE%2Bnw%40mail.gmail.com.