[MW:34247] PQR WITH TWO WELDING PROCESS TO SEPERATE IT

Dear master 

please can you advise me i have some doubt 

in our project i have a PQR qualify with gtaw + smaw butt weld 

Detail :

 

7.14 to 20 (CS & LTCS)
GTAW  5 mm +SMAW 9
ER70S-6 + E7018-1 

and i want to qualify to only SMAW PROCESS is it possible or no 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bbac856e-d25b-4408-acbc-6dc6c047506en%40googlegroups.com.