Re: [MW:34192] Impact Testing requirements for PQR

in addition to above one may consider PWHT requirements if anything applicable as per the design and client spec, if PWHT applicable one may consider additional PQR's or based on the construction code exemption recommendations PQR's Can be avoided by following pre-heat requirements of the construction code.

Regards, 

Srinivas Rao

On Thursday, May 4, 2023 at 3:22:12 PM UTC+4 james gerald wrote:

Appreciate efforts and initiative from ENG.Ahmed.

Just to share. 2 PQR's 6mm & 23mm is sufficient.

There is an ASME Interpretation stating PQR qualified on 6mm and higher thickness qualifies in the range from 16mm.  Someone please share the Interpretation.

Thanks & Regards

J.Gerald Jayakumar

On Thursday, 4 May, 2023 at 03:45:32 pm IST, 'Ahmed Osman' via Materials & Welding <material...@googlegroups.com> wrote:

3 PQR's may be sufficient , 6mm (3-12) 10mm (10-20) 23mm (16-46) 

Best Regards ,

ENG. Ahmed Osman

On Wednesday, May 3, 2023 at 08:44:46 a.m. GMT+3, Jackson Raj <jackso...@gmail.com> wrote:

Dear all,

In Our project has 3 inch to 24 inch and it's thickness 5.49mm to 45.24mm and Impact Testing required for above thickness.

Please clarify how many PQR are required for this job 

Please consider the Impact Testing also mentioned each PQR thickness qualify 

Regards

JJ

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALgFOaXAKmJFBKLz39ZoUn%3Dnwi4Er11Qts17%2BbWyQkBOYML4Eg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/895749842.194908.1683193821769%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/95dfb447-8b39-4c0b-a898-6f5683be32ecn%40googlegroups.com.