Re: [MW:34168] QW-200.4 Combination of Welding Procedures.

Is impact testing is required in production welds?

If not , then Group number is NOT A ESSENTIAL VARIABLE .

Prepare WPS based on available qualified  PQR and use in production welding after review of Weld Plan/Weld Map from AI/TPI as required 

Thanks 

Vishwas 

IWE

On Tue, May 2, 2023 at 8:17 AM U B <dusroni@gmail.com> wrote:

Dear Professionals,

Please describe & explain to me the combination of welding procedures.
As per my project specification group number is essential. I has been separate PQR's P1G1-P1G1 & P1G3-P1G3, now I have to do combination welding P1G1-P1G3. Should I create a new PQR in this case? Or can I combine this PQR P1G1-P1G1 & P1G3-P1G3 (as per QW-200.4 combination of welding procedures)?
Please advise me.

--

With Regards

Udaya bahaskar.D

+919676270121

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANii3RM-gS3HG5Dz4v0bu_S3oxxTKfgguSKgmvG9%3D5k8%3D%2BQ6Jw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3NJiZKT8D2ugsXu7z9O4OSDartr9UbP2o%3D_7jgwNd3wuw%40mail.gmail.com.