Re: [MW:32135] RWC (Responsible Welding Coordinator)

Further to my previous email,

I found the below page in IWE course material. 

Thanks and Regards

Rameshkannan D

Personal Mobile : 0091-9894987227

"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Wed, Mar 31, 2021 at 10:25 AM Ramesh <rameshkannandevaraj@gmail.com> wrote:

Where do you want to sign on WPS/PQR ? as a preparer or checker or approver ? 

You may not sign in any of these areas,  The role  is to perform quality checks during manufacturing  and it shall be defined by your QA/QC manager / Document systems. 

 

You can assist IWE/IWT for preparing WPS/PQR , but the final responsibilities lie with the IWE/IWT holder only. 

Even some case, IWT holders sign itself not accepted by some clients

Refer ISO 3834-2 , Clause 7.3

Also, as per above link, 

It's clear that RWC is not a portable title since There is no actual qualification for personnel responsible for welding coordination. 

only IWE, IWT , IWS  have been accepted as satisfying the specific knowledge requirements for Responsible Welding Coordinators.

Thanks and Regards

Rameshkannan D

"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Tue, Mar 30, 2021 at 5:00 PM ilkinhasanov <ilkinhasanov.91@gmail.com> wrote:

Hi Gents,

Could you please advise ; does RWC (ISO 3834-2) can issue/sign WPS & WPQR and is it requirement of Standard/Codes that  RWC should has a IWE Diploma for this?.

Regards,

Ilkin HASANOV

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ae3963c3-d53c-4bfa-a484-e59726641cc7n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMaSVcGivQTLtybihFiEVXEAcHSSybuhzx%3DymWu-uVDH0ncNzA%40mail.gmail.com.