RE: [MW:29729] Difference in ASTM and ASME material

ASTM is the originator of materials specifications . ASME adopted the ASTM grades for Boiler and Pressure Vessel Industries. In the process of acceptance and adoption some material were accepted as is , some were modified to suit design and application requirements in BPV environments.

Each ASME specification at the very beginning tells what're the differences between this ASME Grade vs the original ASTM grade.

On receipt of materials one should try to match the MTC to the PO requirements and the technical specifications, as sampled below. If the P.O indicates ASME but the vendor supplies ASTM grade, then at least a "Certificate of Conformance"  should be expected at the point of acceptance.

Thanks.

 

P.Goswami.P.Eng, IWE.

Independent Welding & Metallurgical Specialist

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgoswami@quickclic.net,pradip.goswami@gmail.com

Cell/Whasapp:1-905-9793232

 

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ramin Kondori
Sent: June 18, 2019 9:07 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:29724] Difference in ASTM and ASME material

 

Not all ASTM materials are qualified as per ASME standards.

Each ASME standard accepts ASTM materials based on the application.

 

Regards

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

 

 

On Fri, Jun 14, 2019 at 8:28 PM Pankaj Kolhe <pankaj.kolhe15@gmail.com> wrote:

Dear experts,

 

what is the difference in ASTM and ASME material. what care should be taken while reviewing MTC, and lab testing.

when can we say this material is acceptable as per ASTM OR ASME?

 

Pankaj

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAA_HBVuSzAyetS1DzmjbzbP8%2BDN6L3PPx2ZCjDfuni9rbyJW6w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEagfUiHYzBAKFOV2ZDaPrXn97SBaRiLEzzu8qYFaJ-WbCsB4Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.