What are your service requirements...?
Please provide us with the following:
- What are your design code or standards (ASME BPV, B31 series, etc.)
- Design temperature range, pressure range, etc.
- What is your fluid or what are your corrosion requirements (media, CO2, H2S, any acids, etc.)
- Any specific mechanical requirements (impact test, tensile requirements, hardness, etc.)
Regards
Ramin Kondori
Sr. QA/QC & Welding Engineer
-----------------------------------------------------------
PG-Dip. in Welding Engineering (IWE AT 0070)
BSc. in Civil Engineering (IUT)
BGAS Painting Inspector
ASNT Level I&II
On Thu, Jun 13, 2019 at 10:53 PM Ram <rameshsmit@gmail.com> wrote:
What grade of filler wire is to be chosen for MIG welding of 409M Ferritic Stainless Steel?
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/85332ed1-a481-48b5-b76c-876db92dc2ed%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEagfUis8GQ7v7NdhaBbifZDtwOgxm9Y784MuXE96%2BhR38gMSg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment