Re: [MW:29670] Tube to Tube sheet Joint

There is no such overlapping acceptance criteria given in code for the TTS welds.

Regards

Prem Nautiyal


PREM S NAUTIYAL
CELL : 9769316004





From: Joshua <drawing@unitedcoolingtower.com>
Sent: Sat, 1 Jun 2019 22:28:39 GMT+0530
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:29662] Tube to Tube sheet Joint

Dear All,

Tube to tube sheet joint welding, How much overlapping is acceptable in ASME...?

Thanks,

J. Joshua

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https:roups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/176c3784-a0df-45eb-bbba-1bb8c9c4c092@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1559469903.S.78999.autosave.drafts.1559469995.3035%40webmail.rediffmail.com.
For more options, visit https://groups.google.com/d/optout.