Re: [MW:27795] PT required or not during bevel preparation on t 23 tube

PT is required for below reasons.

1. Since this is a Repair weld, to ensure complete removal of Defect, MT is recommended and since this is Tube PT is the possibility.

2. Moreover the Weld Bevel shall be free of lamination and other defects which may extend and open up during welding.

3. It is a good Engineering practice to MT/PT weld bevels.

Thanks & Regards

J.Gerald Jayakumar

0091-9344954677

On Monday, May 7, 2018, 2:45:28 PM GMT+4, Rameez khan RK <rk.rameezkhan21@gmail.com> wrote:

Dear Experts ,

                       can any one please tell me regarding PT required or not during bevel preparation on T 23 tube material during repair. Please give me according standers and code. whats is the possibility for PT on Tubes after repair

Thanks & Regard



Rameez Ali Khan
Mechanical QC Inspector
Mobil: +966582963466

SEPCOIII ELECTRIC POWER CONSTRUCTION CORPORATION

Yanbu Power & Desalination Plant Phase 3, K.S.A  

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.