Thanks.
P.Goswami.P.Eng, IWE.
Welding & Metallurgical Specialist
Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/
Email:pgoswami@quickclic.net,pradip.goswami@gmail.com
From: 'Asif Shahzad' via Materials & Welding [mailto:materials-welding@googlegroups.com]
Sent: May 6, 2018 4:41 AM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:27787] Welding oF dissimilar metal at High temperature(Micro Alloy+P11)
Dear Expert,
We want to weld Micro alloy (Ni,Cr) furnce tubes with the P11reducer in the Steam methane reformer that will be operator at 850 to 900 C temperature.
Please provide your opinion about welding reliability of these two dissimilar metal at high teperature.
Regards,
Asif Shahzad
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment