RE: [MW:27760] Pressure Gauge range Selection for Hydro test

UG-102

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Prakash Chaudhari
Sent: Tuesday, May 01, 2018 10:36 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:27759] Pressure Gauge range Selection for Hydro test

 

UG-99 of ASME Sec VIII Div. 1

 

On 28-Apr-2018 10:47 AM, "Mohan" <ggnanamalli@gmail.com> wrote:

Dear Experts,

 

Where in the code book does it state that the Hydrostatic Gauge should be between 1.5-4 times for  hydrostatic test pressure?

 

Regards

G.Mohanraj

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.