Sunday, May 6, 2018

[MW:27787] Welding oF dissimilar metal at High temperature(Micro Alloy+P11)

Dear Expert,

We want to weld Micro alloy (Ni,Cr) furnce tubes with the P11reducer in the Steam methane reformer that will be operator at 850 to 900 C temperature.
Please provide your opinion about welding reliability of these two dissimilar   metal at high teperature.

Regards,
Asif Shahzad 
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...