Under mentioned conditions, a trial weld run will prove if Ar quality is OK.
From: Prasad Rode <purode333@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Wednesday, 2 November 2016 10:46 AM
Subject: [MW:25644] To check argon quality on field/site.
Dear sir,
We have stainless steel welding on site.
I want to know that is there any trick to check argon quality and secondly to check argon cylrnder,with litmus paper and like that( as I have doubt that contractor is using nitrogen cylinder, as per specification, we want argon only, may be nitrogen is allowed).
Pls provide any solution.
Regards
Prasad
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d480c1f4-900f-49d2-b38e-a622ef2f2f4a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment